Vaping Knowledge Centre

E-liquid FAQ | Halo E-liquid Information

Eliquid FAQS – we at Ecigfuture have provided some tips and answers to? Aboute-cigarette + liquids. If these answers don’t cover your needs, please call us, we are too happy to talk to you and help you out every step of the way.

E-liquid FAQ

Currently, Tribeca is our most popular Tobacco blend and Mystic is our most popular Menthol blend. We do have some exciting new flavors being introduced this year that may change this ranking.

Our ingredients contain USP-grade propylene glycol and USP-grade glycerin along with a proprietary blend of USP-grade natural and artificial flavorings. All ingredients are FEMA-/GRAS-approved food additives, and we use only the highest quality USP-grade nicotine with a Certificate of Analysis. Our nicotine is tested and documented to be a minimum of 99% pure before our E-liquid is created in our US facility.

No. Halo E-liquid should be kept consistently at room temperature for optimal flavor. The flavoring in cold E-liquid tends to separate from other ingredients, significantly reducing the flavor. In addition, if your E-liquid has been left outside in a cold mailbox during winter months, it is highly recommended that you allow it to sit at room temperature for 24 to 48 hours before vaping. This should be ample time for the flavoring to meld back with other ingredients, allowing for optimal results.

This is proprietary information that we are unable to share at this time. There are many companies looking to duplicate Halo E-liquid, and we prefer not to offer any specific information regarding ratios or specific ingredients.

No. Halo does not contain diacetyl in any of our E-liquid formulas. This was a strict requirement for Halo far before it became a popular topic in the forums.

G6 E-Cigarette FAQ

A blue light means your battery is fully charged

You may find when you change your battery the USB light may be purple or red, or flicker between the 2 colours. Don’t worry, this normal. The light once the blue, means your battery is fully charged and ready to use.

The LED Tip is for aesthetic looks, and may or may not light up when charging. When your battery is fully charged and you use your e-cigarette, the LED Tip will light up.

No, your G.6 battery can only be charged using your G.6 USB adapter. If you attempt his or any 3rd party charger you can cause irreparable damage to your battery.

Cleaning your battery is simple and important to maintain your quality of Halo battery. Using a cotton bud gently clean the battery connection area. You will notice black on your cotton bud, this is getting rid of any film of or grime debris.  Allowing your battery to run efficiently at all time. For regular maintenance, it is recommended to do this once a week.

Once the coil burns out in the G.6 mini tank it cannot be replaced.

Your G.6 mini tank will hold 9ml of E-liquid.

It will take 2-3 hrs via your G.6 wall charger. When charging from a USB port on a computer, charge time may be slightly longer.

Halo cannot guarantee that 3rd party items will be compatible with the G.6 battery.

The easiest way to explain what an automatic battery is, it is similar to smoking a cigarette.  The automatic battery, are turned on (activated) by air flow. So all you need to do is inhale. Manuel battery work quite differently. To activate the manual battery, you will find a small button on the battery. The button need to be pressed to begin working. When you let to (release) the button, it will not work as the unit switches off. The manual battery gives you more control. It is a popular choice for more experienced uses of electronic cigarettes but its personal choice.

Depending on your vaping habits, 2weeks.

No, it is simple and much more economical than smoking. First remove the rubber cap from the back of the G.6 cartomizer. Halo’s curved tweezers are perfect for this. Once you remove the cap stand the cartomizer up. You will see the threading and sponge like foam. Add 20 drops onto the white polyfill (sponge like) inside. Avoid the centre of the polyfill, as if E-liquid gets in, it will drip out the other end. It will take about 30 mins for the liquid to be absorbed into the cartomizer. If any liquid has leaked out of the other end, clean up with paper towel. It is important to make sure the thread connector is dry. Do not overfill you cartomizer, this could harm you battery.

When the taste is not as strong (marked decrease) and you notice the vapor too low to no vapor.

When you replace your first cartomizer, you will see how simple it is to do. To remove the used cartomizer, just unscrew from the G.6 battery. Do this by twisting anti clocker wise. Then reattach your new cartomizer, making sure the threaded end of the cartomizer is on top of the battery. This is the opposite end of your LED light.

Triton Tank System FAQ

This may be an issue with the connection between your tank and battery. A quick checklist is, the coil too loose or tight sometimes when I fill my atomizer, I accidently knock the coil and loosen it and it is important when you replace your coil not to tighten it too much. Once you have checked this try vaping again. Thirdly it may be your coil has burnt out and needs to be replaced.

With the Triton battery when first connected it will blink. Whilst charging the light will turn off.

When charging your triton battery, you may see a purple or even red flicker and also possibly a red flicker to blue flicker. This is part of the charging process and when fully charged the light will stay blue.

It don’t take long 1-2 hrs via a wall charger. Slightly longer from a USB port on a computer.

It possible you have not switched your battery on. Simply click the button 5-7 times quickly. You will see the button light up indication your battery on.

The triton tank holds 2.4ml of E-juice. Filling your tank to 2.0ml mark this will help extend the life your coil.

When your E-liquid gets in to post of the coil this will occur. Also the coil may be loose or need replacing because it’s burnt out.

This would be a burnt coil or grime film on the battery connection. Check your coil is not to tight or loose.

This indicates it’s time to chance your coil.

Yes, to replace your coil, remove your battery from your tank. Pour out any E-liquid reaming. Then unscrew the coil, by holding the rubber tip. Twist it carefully anti clockwise. It’s very easy to screw in your new coil. You must have the threading down in the tank. Twist clockwise, remembering not too tight. You are then ready to add your favourite E-liquid. Ecigfuture have a large variety of flavours to try. Replace your atomizer to battery and add your tip ready to vape.

One to 3 weeks, possibly up to 4weeks, depending on your vaping habits.

Yes, a quick warm rinse under water. It is a good idea to do this, just before replacing your coil. It is important to use the water sparingly and thoroughly do ??? Your triton tank, before placing the new coil in your tank.

Once your wick is burnt out. We do not recommend washing your coil, so do not wash your coil or wick. Replace a new coil.

The coils are in the tank, this is normal, don’t worry. They may look like they have disappeared, this is due to the colour of the E-liquid in your tank.

You may have put too much E-liquid in your tank or your coil needs replacing as it has burnt out.

Tracer FAQS

There is a ??? button on the side of your battery. To activate, click the battery 5 times in rapid succession. You will know when it’s successfully turned on as the backlight of the button will blink 3 times.

Absolutely. It will save your battery being drained of its power. It’s always a good idea to turn off your tracer battery when not in use. The size makes it easy to store, in your purse or pocket?

In a safe place, out of reach of children and pets. Keep it in a dry environment and if a hot day keep out of heat as this would cause your battery damage.

Firstly place the small connector of the USB into the charging port of your Tracer battery. You will see the larger end of the cable which need to be inserted into the Tracer provided wall charger or into a computer or any USB compatible source.

The charge indicator when connected to a chosen power source will glow red. When the red light blinks five times your Tracer battery is fully charged and ready to use.

If the tracer battery is completely flat it will take three to three and half hours to fully charge.

This is simple. Unscrew the tank from your battery. Make sure you hold the tank (with the mouthpiece) side down. You will see the base of the tank, turn the tank anti clock wise, separating it from the base, hold the stainless steel chamber on an angle and pour one of your favourite E-liquids in to the tank along the glass side.

The tracer will work best when you keep the level of E-liquid at 2ml, consistently. By doing this the tracer tank (heating element) will remain moist. This will extend the life your coil. Please, refill before the E-liquid drops below your coil in your tank.

For Maximized flavour and great vapor production, we recommend a higher V.G content for your E-liquid choice but its personal choice.

What does the term “Adjustable Airflow’ mean?

This enables you to change the airflow and control low much air you take in. The great thing is that the tracer tank with its adjustable airflow, gives you more control over your vaping experience. If you have a narrow hole, you will enjoy a fighter draw with a warm vapor. The wilder the air hole, the Halo Tracer gives you the experience of a looser draw, crating cooler vapor.

When you experience a burnt test its time to change the Halo coil head. Another reason is if you experience a burnt taste or there is very little vapor appearing from your Tracer tank.

It’s a good idea to do this regularly. This removes any residne left by the E-liquid. I recommend to also wash out. The tanks when changing E-liquid flavours. This way, you will not have any carry over flavour of the previous E-liquid.

The best way to clean your tracer tank is take each single component apart. A good way to start is to take the tank off the battery. Hold your tank with the mouthpiece down, unscrew from the chamber base, by turning anti clockwise. Empty any remaining E-liquid remove coil head, simply turn anti clockwise. Once these steps are followed remove the tracer mouthpiece and rinse the individual components. (Do not Rinse the coil head) under warm water. When you can see all the E-liquid has been removed, use a cotton bud. Which will make sure it is completely clean, replace with a new coil.

Reactor FAQ

To turn on your Reactor, press the firing button on the side of the battery five times in rapid succession. Once the battery is turned on, the LED screen will become visible.

Yes. While the battery will not drain just by being on—and though there are safeguards in place—it is best to turn off the battery any time you have finished using the Tracer and are about to store it in a pocket, purse or drawer.

This device should be kept out of reach of children and pets and stored safely in a dry environment. Do not store in high-temperature areas as this will cause irreversible damage to batteries and other components.

To switch between wattage/voltage modes, click the firing button three times in succession. The LED screen will reflect the current mode of the battery.

The wattage/voltage can be adjusted by pressing the up or down power adjustment buttons until the desired level is reached. Increases in voltage or wattage will both translate to an increase in power. It is recommended to start with lower levels and slowly increase the wattage/voltage.

Absolutely! It will save your battery being drained of its power. It’s always a good idea to turn off your tracer battery when not in use. The size makes it easy to store, in your purse or pocket?

Halo have made this simple, your LED screen displays the amount of battery life left. You can change your battery at any time.

The small connector of the USB cable, needs to be attached to your reactor battery. Like the tracer the larger end of the cable can be inserted into a Halo reactor wall charger or in to a computer. The battery indicator flashes until battery is fully charged and ready to use. This is visible on your LED screen. You will see the battery level indicator stop blinking. It will then shine for 10 seconds, before turning off.

If the battery is fully drained, about 5hrs.

This is simple. Unscrew the tank from your battery. Make sure you hold the tank (with the mouthpiece) side down. You will see the base of the tank, turn the tank anti clock wise, separating it from the base, hold the stainless steel chamber on an angle and pour one of your favourite E-liquids in to the tank along the glass side.

The tracer will work best when you keep the level of E-liquid at 2ml, consistently. By doing this the tracer tank (heating element) will remain moist. This will extend the life your coil. Please, refill before the E-liquid drops below your coil in your tank.

For Maximized flavour and great vapor production, we recommend a higher V.G content for your E-liquid choice but its personal choice.

This enables you to change the airflow and control low much air you take in. The great thing is that the reactor tank with its adjustable airflow, gives you more control over your vaping experience. If you have a narrow hole, you will enjoy a fighter draw with a warm vapor. The wilder the air hole, the Halo Reactor gives you the experience of a looser draw, crating cooler vapor.

When you experience a burnt test its time to change the Halo coil head. Another reason is if you experience a burnt taste or there is very little vapor appearing from your Tracer tank.

It’s a good idea to do this regularly. This removes any residne left by the E-liquid. I recommend to also wash out. The tanks when changing E-liquid flavours. This way, you will not have any carry over flavour of the previous E-liquid.

The best way to clean your reactor tank is take each single component apart. A good way to start is to take the tank off the battery. Hold your tank with the mouthpiece down, unscrew from the chamber base, by turning anti clockwise. Empty any remaining E-liquid remove coil head, simply turn anti clockwise. Once these steps are followed remove the reactor mouthpiece and rinse the individual components. (Do not Rinse the coil head) under warm water. When you can see all the E-liquid has been removed, use a cotton bud. Which will make sure it is completely clean, replace with a newCoil.